What is the best way to glue plexiglass or acrylic sheets?

At a guess it would nearly be cheaper, or atleast not much dearer to knock down your house, dig it out and start again, you get a basement and a new house in one go.

You need to bleed the air out of the pipes. The bleed valve is unlikely to be in your apartment-you are going to have to ask your landlord to have it done.

nothing - you should've wiped it off with bleach when you discovered it. mold is great for this ...

Egad - if you find one, I'm out of a job! Most construction projects are varied enough that there is no program that will give you a construction schedule, i.e. I'm building a house th...

You could try to wash the walls with TSP (it is found at hardware and painting stores). If washing the walls does not work, you will have to wait and see if it air out on its own or paint the wall...

Utilities use disconnection as a last resort and generally will work with a consumer to establish a mutually acceptable payment schedule. Consumers who require immediate assistance should conta...

I'm pretty sure you used latex paint. For just a few drops, scrape it off with your fingernail. That way you won't ruin the finish. After you have most of it off, use a damp cotton rag...

An air cushion can fill with water. To restore the air to all air chambers, turn off the main shutoff valve and completely drain the water -supply system. Open all faucets to let air in. Then close...