| Do It Yourself (DIY) |
| How do I keep my bathroom mirror from fogging up when I'm taking a shower? |
Take cold showers...you prolly wont wanna look at yourself after that though lol ... |
| Where can I get free plans for building a wooden gate? |
go to freeplans.com and there are many other wed sights out that offer freeplans DIYers ... |
| How do I turn my table saw into a disk sander? |
You can get a belt / disc sander for about $220 from Grizzly or Harbor freight tools. As an ex-cabinet maker, missing two knuckles for 22 years, don't play with a table saw. Hey Don, Here�... |
| Can i install a pumped electric shower straight to cold water main? |
The Triton t90 MUST be fed from a cold water storage tank.
Get a plumber to run a dedicated supply from your tank to the Triton. ... |
| Easiest and quickest way to remove drywall mud from my concrete slab? |
WATER... drywall mud is water soluable...use a drywall knife or scraper...and a hose. ... |
| How close to the street can you build a garage? How much driveway do you have to have? |
I live in Iowa also and am currently building a garage too. I was told to look down the street and build so that my garage doesn't stick out further than anyone elses.
This made sense to me... |
| How do you do a knockdown ceiling texture? |
go to www.drywall school.com lots of good help and for $10.00 you can get detailed instructions and one on one help ... |
| How can I keep my hot bedroom cool/cold this summer without running up the electricity bills? |
Cool and/or Cold are probably relative to your tolerance level. Have you a window?
$1000 is a large amount of dollars when considering AC for a single room. Portables are available, window u... |
| Any suggestions on building a really cool tree house for my kids? |
Good source of materials, residential jobsite dumpsters! It never ceases to amaze me what gets thrown away daily on construction sites. Do you have any road construction giong on in your area? Usua... |
| I need to find the Easy Sew Portable Sewing machine sewing manual, and it is driving me crazy. Anyone? |
Sorry, I don't have it myself but if ayone can get it for you it would be Dan at the Sewing Machine Shop. Contact sewingmachineshop.com The guy is a font of knowledge! ... |
| How do I remove a stripped screw? With a Philips head screw driver an screw? |
If the Philips Head Screw is stripped so that the Philips Head Screw driver no longer works - the slots are gone. Then you can use a special tool called an "Ez-Out" which may require a h... |
| I am trying to construct concrete walls in a rather unique way. Will my plan work? |
no.......ur wasting ur time and money....what ur doing is called 'forming" and the material ur thinking of using is not going to hold the presure of the concrete......i dont know how high... |
| How can you get apart a dresser? |
hmmmmmmmm..it's prolly glued also..how would you reassemble back together anyways??...donate it! ... |
| How do I make a metal garden stake that looks like a lilly, or maybe even a bluebonnet? |
If you get some green gardening tape you can attach a synthetic flower or two to the top of a rod. ... |
| How do you know which way the air flow is to install the filter? |
The arrows should point in the direction of the air flow. If air is drawn through the filter then the arrows should point towards the housing the filter fits into. In most cases the would be up or ... |
| What websites can i find a good plan to build a cockatiel cage? |
the best bird cages are generally, a very tall saquare shape. (think a rectangle like a sky scraper.) so I would use
1/4 inch square fencing, and non-chemically treated wood. pine or somthing e... |
| What can I do with a space between my cabinets? |
if you cant match the doors to create a "cookie sheet" cabinet. I have an area where I added shelves and found wicker baskets that fit in space and have them filled with cookie cutters,... |
| What's the difference between cement and concrete? |
Cement (notably Portland cement) is the material to make concrete.
Concrete is a mixture of cement, sand, and (if required for the application) aggregate (usually gravel)
Cement and concret... |
| How do you open a front loading dryer to change the belt? |
Disconnect the power. then look at this link for more info. ... |
| Where can I buy a prefabricated enclosure for children to use to wait for a school bus? |
Well, you could buy the little storage units like they sell at any home improvement store. They should be going on sale right about now. ... |
| How hard and where can i find some info on converting an 18" dishwasher cabinet slot into a 24" slot? |
you might have to move some cabinets, just make the available opening 24 inches, plus one inch so you have room to maneuver it into place ... |
| How hard is it to change the floor flange under the toilet? |
If the drain is PVC, you just cut the flange off and glue one on with PVC pipe glue. The problem you may run into is once cut the pipe may not be long enough. If that is the case, you will have to ... |
| Is it OK to mix deck stains of various brands and colors? |
yes it is okay. but only mix water based together or oil based together.
Just read the clean up instructions on the cans. if it says that you can clean up with soap and water it is water based.... |
| What chemicals are used in the secret bonding agent of tub refinishing? |
Topcoats :
---------------
HSLD 5000 Resin / Catalyst
Porcelain Enamel 1000 Resin / Catalyst
Protecthane Iso-Free Resin / Catalyst
Primers
-----------
XL Aerospace Resin / Catalyst ... |
| How to keep a gate from swinging in the wind? |
Try putting rubber padding between the gate and where it bangs. ... |
| How can I make a CCTV vandal proof? |
Put a small cage around it to prevent them throwing objects at it. ... |
| Any ideas why one upstairs toilet cistern will not refill properly each time it is flushed? |
Is the float arm (ball valve) falling when the toilet is flushed? if it is, is it going all the way down or is the valve sticking closed?
If neither of these is the problem, and from your descri... |
| How wide do the stringers have to be, when building a staircase? |
the best thing u can do is contact city hall.they will be able to tell u what the minimum and the maximum depth of ur treads should be.
where i live it is no less than 9 1/4 inches in depth,and no... |
| Why would the pex pipe melt and split coming off of a wood furnace? |
Like I said before you deleted your previous question and rephrased it so it would sound "better?". Plastic melts when it gets hot and the furnace gets very hot! It's like putting ... |
| What will happen if I just use bleach and water to clean the concrete before I stain it? |
You will probably end up wasting al the money you spent on the stain if you don't prep the concrete properly. Bleach will not do the same job as the acid, partially because it is a base (the ... |
| Page:11 Previous-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28-29-30-31--Next |
