![]() |
|
| *Home>>>Do It Yourself (DIY) |
Is there any way I can increase the water pressure in our bathroom, without having to buy new equipment? |
We rent a one-family house which has a regular bathroom with a tub and shower upstairs. Downstairs, in an unfinished basement, there is also a half-bath with just a toilet/sink/shower.Tihe hot water tank is in the basement. We just can't seem to get any water pressure when we are trying to take a shower upstairs or when we work at the kitchen sink. We have lived here since April 24, 2006. Our landlord lives right next door. I hate to bother them if there is nothing that can be done anyway. Any ideas/suggestions/thoughts? It is also very hard to regulate the water temperature in the shower as far as hot and cold. It seems to be either very hot or very cold before you finally get it adjusted. Your regulator valve (controls the pressure from the main line) may be going bad (if you have one). They are pretty much standard these days. You may need to empty your hot water heater and "backflush" your water lines. It could also be as simple as checking your shower head and kitchen taps (anywhere you have low pressure) for mineral deposits like calcium...just take them off and remove any buildup and replace. Try the devices that oxygenate the water. You attach them to the faucet. They don't actually increase pressure or water flow but they might give you what you are looking for. I've seen them in the catalog, Home Solutions. You could find them by Googling. Just buy from a company that will let you return it if you aren't satisfied. Try this technique as air might be in your water lines. First of all, nothing short of spending thousands of dollars on new pumps, pressure tanks, and ripping all of your old pipes out of the wall and replacing them with all new larger diameter pipes will actually increase ones water pressure, and even then all these measures may not really do that much. There has is no such thing as a shower head that will increase your water pressure and anyone who tells you anything differently simply does not know what they are talking about. Certain shower heads CAN increase the velocity {force} of your water, which does in fact give you a better shower. The problem is that most people who suffer from low water pressure have absolutely no clue what shower head to buy. Just going out and buying a shower head and removing the flow restrictor does NOTHING. Removing the flow restrictor only increases the flow rate and not the velocity. The secret to getting a good quality shower if you have low water pressure is this: |
| Related information |
It is $125 for labor in North Dakota. Openers start at about $125. This project is within the ability of most DIYers, about a six hour job if you have never done it before. Be careful, thoug... 50 years old is amazing and Kudos to you Dad for that. You'll have to expect some shock, but there is another issue I'd want to consider. The GIFT bush/plant and its proximety to an... Tile or flagstone. ...The heat lamp example you use is great as long as you realize they are using materials properly sized and rated for the electrical current draw and high temperature that heat lamps can generate. T... Go to Pier-1 Imports and get some bamboo screening. Its cheap and lasts a few years. ...Find the studs and hang the towel holder there. Fill the holes with some spackle or putty. Ask the guys at Home Depot or Lowes. They'll know what you can use. ...rock salt or water softener salt works great. ...This site shows how to cover a sharp corner, or a rounded corner. ... |
Categories--Copyright/IP Policy--Contact Webmaster |