www.todaysmodernwoman.com
*Home>>>Do It Yourself (DIY)

How much should I pay for a garage door opener instalation?

All the electrical instalation is ready it just needs to be connected to the door and attached to the ceiling.

It is $125 for labor in North Dakota. Openers start at about $125. This project is within the ability of most DIYers, about a six hour job if you have never done it before.

Be careful, though. If you switch wires around, you will drive the door into the concrete and seven feet under ground. Good luck.

$200 is standard in ohio. Plus the cost of the opener.

Tags
　　Cooking & Recipes 　　Beer, Wine & Spirits 　　Other - Home & Garden 　　Maintenance & Repairs 　　Garden & Landscape 　　Do It Yourself (DIY) 　　Decorating & Remodeling 　　Cleaning & Laundry 　　Other - Family & Relationships 　　Weddings 　　Singles & Dating
Related information
  • How do I dig up and replant a rose bush?

    50 years old is amazing and Kudos to you Dad for that. You'll have to expect some shock, but there is another issue I'd want to consider. The GIFT bush/plant and its proximety to an...

  • What is the best flooring material to use in a basement that sometimes gets wet?

    Tile or flagstone.

    ...
  • Can i wire lgiht sockets to an extension cord?

    The heat lamp example you use is great as long as you realize they are using materials properly sized and rated for the electrical current draw and high temperature that heat lamps can generate. T...

  • What is the best way to block the view into my yard from an alley?

    Go to Pier-1 Imports and get some bamboo screening. Its cheap and lasts a few years.

    ...
  • How can I fix 2 one inch holes in drywall which are centemeters apart?

    Find the studs and hang the towel holder there. Fill the holes with some spackle or putty. Ask the guys at Home Depot or Lowes. They'll know what you can use.

    ...
  • What is the best remedy for killing grass in a driveway?

    rock salt or water softener salt works great.

    ...
  • How do I fold the fabric at the corners of a bench I am recovering?

    This site shows how to cover a sharp corner, or a rounded corner. ...

  • What type of wood should I use when building a built in entertainment center?

    If you want to do this project. Why don't you look the information on the web site yourself?

    ...
    • 　

    Categories--Copyright/IP Policy--Contact Webmaster