Whats the best way to remove a splinter caused by a ceramic tile?

Can't see anything sticking out, its very painful.

You'll need to get a high power jeweler's loupe (the thing they stick on their eyes so that they have a free hand) and a really good pair of tweezers, and most likely a needle. Make sure that you sterilize the needle and tweezers first. Look through the loupe and see what you can find. If all you see is a hole, then you need to start to peel the skin from around it with the needle until you can see the splinter. Then grip it really good with the tweezers and pull it out.

erm cut your finger off......

..or scrape over where it hurts with a stanley knife.....

or get a woman to do it... they're good at them things

ye i know what you mean.get a fine pair of tweezers a good magnifying glass and a bright torch..if you are in gt britain you will be able to get tweezers and mag glass combined from betta ware catalogue about 拢5.

You'll probably need to soak your finger in warm soapy water a couple of times a day. It will take a few days for your body to start pushing it out.

Once it does start to come out, if you can't get it with tweezers, then put a bit of elmers glue on it, let it dry and then peel the dried glue off. The splinter should stick to the glue and come out when you peel it.

Tags

　　Cooking & Recipes 　　Beer, Wine & Spirits 　　Other - Home & Garden 　　Maintenance & Repairs 　　Garden & Landscape 　　Do It Yourself (DIY) 　　Decorating & Remodeling 　　Cleaning & Laundry 　　Other - Family & Relationships 　　Weddings 　　Singles & Dating

Related information

Is it acceptable to put deck support posts into the ground with concrete around the posts?

That is how I did mine.

...

What is a good hardware solution that prevents me from forgetting to lock my office front door?

First, install a closer. Second, install a Schlage A series, Arrow M series, or other quality lock that that can be set to re-lock itself whenever the door is closed. Or, order a lock with a sto...

How do I get rid of an odor in a dresser?

Wipe the inside of the drawers with a rag soaked in vinegar. Then using another clean rag, soak a rag in vinegar for each drawer . Put them in place and leave the rags for 48 hours or until they ...

How do you make a patch work pillow?

Buy a pillow form the size you want. With scissors, cut strips of fabric 2 1/2 inches wide, pick a pair and lay one atop the other, right sides together, sew down one long side using 1/4 inch seam...

Best way to check if a 20x25 floor is level before wood floor installation?

2 options 1) snap line. 2) laser level.

...

Is it better to split freshly cut logs or wait until they've dried?

now ,the propose for spliting is to let the wood dry out faster, exposes more surface area, plus it will be harder to split once it drys out,

...

What is the difference between masonry cement and portland type 1 cement?

It depends on what you are going to do with it. Masonry Cement is designed specifically for use in mortars used for brickwork and block work, external rendering and internal plastering. Port...

What is the best sewing machine for the money?

I bought a Janome from HSN and it is a terrific machine. I made curtains for my living room and everyone thought I bought them. I've owned 2 different Singers, and one White. I like the Jan...