www.todaysmodernwoman.com
*Home>>>Do It Yourself (DIY)

How do you build a mini bar?


I am not a carpenter but I have some fundamental building skills and I am looking for some plans/sketches/whatever to help me build an awesome mini bar. If you know resources that might have multiple styles of mini bars that would help as well. Thanks.

Start with a mini hammer and nails...

Kidding aside, You need to be somewhat more specific, Are you looking to build out of wood? Glass block? Metal?

What type of material are you considering for a countertop?

Design/style/construction will be directly effected. Also, will you have a working sink? Mini refrigerator? It all comes into play.

Provide more data in the follow up section to the question and you will get better answers.

w/ wood and glass

buy a how to do book...they're very helpful

Design it yourself. It will be more fulfilling when you show it off to your friends.

ask Mini Me...he can help I bet

What I would do is just go to local building stores and look around. These will give you some ideas then just sit down and decide what style you want and draw it up yourself....you and only you know the look you want and the space it needs to be in....that is where I would start.

Tags
  Cooking & Recipes   Beer, Wine & Spirits   Other - Home & Garden   Maintenance & Repairs   Garden & Landscape   Do It Yourself (DIY)   Decorating & Remodeling   Cleaning & Laundry   Other - Family & Relationships   Weddings   Singles & Dating
Related information
  • I need directions and a blueprint for building a mallard duck house.Does anyone have a good website?

    www.goduckyourself.com

    ...
  • Is there anything you can do about creaky floor boards?

    You really can nail them down. Go to your local hardware store and ask someone there for the correct type of nails for the job. (I think they are just "finishing" nails, but I am not su...

  • How do I calculate the number of ballusters between the posts on my new deck?

    Add 1 1/4" (the width of one balluster) to the space between two posts. For example, if you have a 61" distance between two posts, use 62 1/4". Then try dividing that by 3.5* (your...

  • How do you get drywall patches to blend?

    Where I live in Texas the walls are all textured. I have matched the texturing when drywalling by lightly going over the wet mud with a dry paint roller. You could also try a sponge. Practice fi...

  • Where do the red and white wires go when replacing a baton light fitting with three terminal halogen fitting?

    Get an electrician! Most house fires are electrical in nature, and most electrical fires are caused by people doing things without knowing how to do them correctly. You might get the light to wor...

  • What is a cheap way to soundproof a window?

    Styrofoam will work and so will cork board. Make sure you cut to cover whole window. Heavy drapes will not cut down on the sound. If it is coming through the walls that may be a problem but the ...

  • How do I make sure soldered and taped wires in a junction box at a light are properly insulated and protected

    Pull off the old tape. If the connection still looks tight and good, re-tape it with modern vinyl electrical tape.

    ...
  • Best way to remove both the label and the glue from wine bottles?

    First soak to remove most of the label. Then use GooGone to remove any glue that is left. 鉁?/div>

    • ...
  •  

    Categories--Copyright/IP Policy--Contact Webmaster