Is there a store when I can purchase a vent to install in my pantry door?

Pantry walls are insulated and back pantry wall faces the garage. The pantry gets pretty humid and I need a way to ventilate it without leaving the door open. Do I have other options?

Try a louvered door. No holes, vents or electrical wiring needed. Any home improvement ctr carries them.

Go to a home improvement store and look for one. Make sure to ask about installing it properly too.

go to a heating and cooling shop they can get you vents that will attach to both sides of the door with screws

install a vent in the dooor which you can get from home depot or lowes

I really wouldn't recommend it, but you could install a bathroom vent fan in the ceiling or wall, venting into the attic or garage. It would suck cool air in under the door and keep it cooler. Since you don't "live" in there, I really don't think I'd keep stuff in there that couldn't handle the climate. You would be throwing away good money running the fan. I guess another option wuold be to buy a couple of white louvered eaves vents, cut a hole close to the top of the door, mount one on each side of the door and let the natural flow of heat rising flow out the vent bringing in cooler air from under the door.

Tags

　　Cooking & Recipes 　　Beer, Wine & Spirits 　　Other - Home & Garden 　　Maintenance & Repairs 　　Garden & Landscape 　　Do It Yourself (DIY) 　　Decorating & Remodeling 　　Cleaning & Laundry 　　Other - Family & Relationships 　　Weddings 　　Singles & Dating

Related information

How do I make a mold for pouring concrete?

Most people make molds out of latex with a fiberglass mother mold. Basically you use a little rubber for the detail and the basic shape is held in place with fiberglass. If you want to see pictures...

What is the difference between replacement windows and new construction windows?

Replacement windows generally do not have a nail-fin for installation and are installed with fasteners through the sash. New Construction windows have the nailfin and are usually installed directly...

What is the least expensive way and how to have electricity independent of city services for a residence?

In your area solar makes the most sense, but you could start small and work up. depending if you have any power source at all at this time? Having an alternative energy source usually means you mus...

How to make a Bioscope (primitive motion picture projector) for entertaining kids?

No - but knowing the right name may help you track down the directions - it may be a kinetoscope. I saw one made from a lampshade kind of thing with another cylinder of paper inside - Something wi...

What's the best way to get started on a basement remodel?

Call some contractors and get estimates. If you plan to do it yourself, the basic steps are: Address any water/leakage issues Frame out the walls Install electrical Sheetrock and texture ...

What kind of foam should I use to replace my couch cushions?

I would go with the memory foam so that after you get off the couch it goes back into the original shape. this also provides the greatest comfort while sitting on the couch.

...

How do I remove a stripped plastic nut?

I always used a reciprocating saw and cut them off I used duct tape to protect the porcelain its tougher. A hacksaw is hard to do it with because you will be cutting on an angle,if you dont have a ...

How do I fix curtains to upvc conservatory?

I'm not sure if you have any space at all above the conservatory, between the tops of the windows & the ceiling. If not you'll have to fix the curtain pole to the ceiling using suitab...