|
|
| *Home>>>Do It Yourself (DIY) |
What is the best way to separate copper wire from electrical motors at home? |
I work in the HVAC field and recycle the old equipment. Reuse parts that are still good, etc. I take alot of items to the salvage yard but really hate to throw out the electrical motors as steel scape. Especially with the price of copper. the only ways i know of are to unwind it or to cut the stator in half and pick out the wire. |
| Related information |
Get a can of WD40 (great stuff for such problems as yours) and borrow a wrench from a neighbor. Spray the stuck stuff, wait a few minutes and give it a go with the wrench. Remember that clockwise ... go to home depot and get some waterproofing stuff. it's used on decks. you could ask someone there also. i would think that you'd need a lot if you want to do it keep the bark, which m... i found spraying windex or ant traps work ...Everything can be used as something it's not!For instance: a dresser in back of the couch can help seperate a lg. room by topping it with a small lamp,pictures etc. Wha-la! You now have a sofa... From the outside looking in - find the dimensions from the inside edges of the entry door's brick molding (see illustration above). This is where your storm door will attach - the brick moldin... Take it out of the sunlight if you can and refinish it. It's not a big deal, just remove the finish with a sander (fine sandpaper) and refinishing is as easy as wiping on a new finish. It&... Maybe this will help: ... Overlay the gap with a piece of remnant larger than the gap. Temporarily tack it down . Use a straightedge as a guide to cut through both layers of carpet with a sharp utility knife The patch &a... |
Categories--Copyright/IP Policy--Contact Webmaster |