How can I make these tree stumps into steps?

I have these 2 great trees stumps and want to make them in to steps going up to our hot tub. I know to sand them diwn on top but the sides I want to still have the bark on them. I want the top to be smooth and I want it all to be water proof. Any ideas? I have never done anything like this before.

go to home depot and get some waterproofing stuff. it's used on decks. you could ask someone there also. i would think that you'd need a lot if you want to do it keep the bark, which might not be possible, depending on the tree, i'm not sure though. i would think probably the thicker the waterproofing material the better.

the first answer was correct. it takes an enormous amount of polyurethane varnish to coat effectively. will it be outdoors in all weathers or under cover? do you want to see the natural look of wood as well as bark? have you thought about slipping on wet surfaces? or will you have rubber matting fixed to step or sand etc used for grip? hand rails ?
it gets complicated too as if any guests slip and get hurt you will be liable for the injuries if you have not taken all reasonable precautions against such injuries etc.
not nice to think like that and we know you just want to see and enjoy the Wood and its 'natural' look. good luck. you may want to look at tables where they have used bark and wood with polished surfaces to see how they were treated.

about a million coats of polyeurethane, plus some sand in the poly to limit slipping

Tags

　　Cooking & Recipes 　　Beer, Wine & Spirits 　　Other - Home & Garden 　　Maintenance & Repairs 　　Garden & Landscape 　　Do It Yourself (DIY) 　　Decorating & Remodeling 　　Cleaning & Laundry 　　Other - Family & Relationships 　　Weddings 　　Singles & Dating

Related information

How do i get rid of pesky ants in my room?

i found spraying windex or ant traps work

...

I need help with creative ideas to decorate an apartment on a budget!?

Everything can be used as something it's not!For instance: a dresser in back of the couch can help seperate a lg. room by topping it with a small lamp,pictures etc. Wha-la! You now have a sofa...

How do I measure for dimensions of a new storm door?

From the outside looking in - find the dimensions from the inside edges of the entry door's brick molding (see illustration above). This is where your storm door will attach - the brick moldin...

How do I fix severe fading on my coffee table?

Take it out of the sunlight if you can and refinish it. It's not a big deal, just remove the finish with a sander (fine sandpaper) and refinishing is as easy as wiping on a new finish. It&...

How do I start a hydroponic garden?

Maybe this will help: ...

What is the best way to do carpet patching?

Overlay the gap with a piece of remnant larger than the gap. Temporarily tack it down . Use a straightedge as a guide to cut through both layers of carpet with a sharp utility knife The patch &a...

How can I cut angled support braces to support a shelf in my garage?

They sell all sorts of steel shelf brackets at Home Depot or Lowes. Some of them are very strong. If you want to cut them yourself then just whatever angle and length works best with your shelf...

How difficult is it to cut wall tiles and to drill into them?

Not if you have the right tools.Obviously, a tile cutter.Make sure you get the measurements right, mark the line, hold the tilecutter against a ruler or straight- edge and score the tile. It shoul...