![]() |
|
| *Home>>>Do It Yourself (DIY) |
How do I connect a second story electrical outlet through the attic? |
I have a second story outlet that is not connected in the attic. The outlet is finished in the bedroom, but it was not connected to anything in the attic. I want to connect it to the electrical system. How do I do that? Could you refer me to a DIY website? I have basic electrical skills. I'd just go up in thr attic and see where it was disconected.If it is a finished outlet it was probably used in the past.Question to ask is why was it disconected?? As far as wireing just like to like(bl-bl;wt-wt;gn-gn)http://www.electrical-online.com/wiringd... first, make sure there isn't an unconnected line in the wall that was just never connected. second, are the other outlets in the room supplied from attic? if, not, then it was probably wired from the first floor. |
| Related information |
buy some masonry nails to be specific. you can buy them at any hardware store. some come with a little washer on the end of them. or for hanging pictures you can also get plastic hooks with a stick... spaceframe. like the answer above, tubes are strong, but if you make the whole structure as a spaceframe it will be strong and light. If you don't know what a spaceframe is, look at how the bi... I would use a coat of "Killz Acrylic-Latex Primer" (this seals it and protects it from water damage) and then use any kind of water-based paint over that.; a satin to semi-glossy sheen ... Most concrete floors getting this kind of flooring are below-grade (such as in a basement.) Those floors only use laminate flooring, as it is the only thing recommended for below-grade (as the oth... You need to get a plumber to move the bathtub over to the shower area. Otherwise simply get a long shower hose and attach a hook to the wall near the rim of the bathtub. BTW I have seen retrofitt... You can paint both the wall and the pipe. There are special sealers for concrete to keep water, mold, mildew off. Just clean up the concrete and pipes with some water mixed with a little bleach and... Any PORCELAIN "slate look" tile from Lowe's will work. Prices range from $1.18 sq ft & up. With your area size your probably looking at an hour or so of work. The procelain is... I have been told a blow dryer, for hair, will loosen it enough to peel off. You can try adding a little water at the edge of the tape to re-liquify the adhesive as you heat it up. Otherwise, stea... |
Categories--Copyright/IP Policy--Contact Webmaster |