|
|
| *Home>>>Do It Yourself (DIY) |
How can I build the lightest tower with a platform that holds the most weight, with the following materials? |
I need some tips. The tower has to be about 75cm tall and 30cm long and 30cm wide. It needs to be as light as possible btu be able to hold a lot of weight. I have some tools (ie. knife, glue gun, scotcch tape, ruler, paper, scissors, etc.) and I also have wood, foam, straws, and fishing line. spaceframe. like the answer above, tubes are strong, but if you make the whole structure as a spaceframe it will be strong and light. If you don't know what a spaceframe is, look at how the big cranes on building sites are constructed. a triangle is a very rigid shape, thats how the spaceframe is so strong. one of the strongest and simplest forms for strength is a tube or similar IE a polygon.pentagon.hexagon,dectagon etc. |
| Related information |
I would use a coat of "Killz Acrylic-Latex Primer" (this seals it and protects it from water damage) and then use any kind of water-based paint over that.; a satin to semi-glossy sheen ... Most concrete floors getting this kind of flooring are below-grade (such as in a basement.) Those floors only use laminate flooring, as it is the only thing recommended for below-grade (as the oth... You need to get a plumber to move the bathtub over to the shower area. Otherwise simply get a long shower hose and attach a hook to the wall near the rim of the bathtub. BTW I have seen retrofitt... You can paint both the wall and the pipe. There are special sealers for concrete to keep water, mold, mildew off. Just clean up the concrete and pipes with some water mixed with a little bleach and... Any PORCELAIN "slate look" tile from Lowe's will work. Prices range from $1.18 sq ft & up. With your area size your probably looking at an hour or so of work. The procelain is... I have been told a blow dryer, for hair, will loosen it enough to peel off. You can try adding a little water at the edge of the tape to re-liquify the adhesive as you heat it up. Otherwise, stea... I have read that they should be set quite high between 100 and 110. Due to the fact that those fans use quite a bit of electricity while on. And your attic can reach tempatures of 150 degrees or ... You can add texture by getting wall putty and a putty knife and spreading the putty on the wall in the pattern you want...then paint it. ... |
Categories--Copyright/IP Policy--Contact Webmaster |