What temperature should the attic fan be set at?

You can add texture by getting wall putty and a putty knife and spreading the putty on the wall in the pattern you want...then paint it.

The R value for this is small. Too small to consider for any type of Resistance to heat gain or loss through the home. What are you trying to insulate?

In a spray bottle, mix 1 tablespoon lemon dishwashing liquid, 1 tablespoon lemon scented ammonia, and water. Spray around your door and the walls of the house/garage. Dump any standing water in yo...

Schlage and Kwikset both make residential duty remote deadbolts. They are not very expensive and will use the same holes as your existing deadbolt. No doubt Home Depot and Lowes sell then, or, you ...

this could be a couple of things really the seal inside the tap might be broken. second thing could be that thread on the actual tap could be broke. To be onst unless you know what your doing the b...

Hate to say it, but this really isn't such a hot idea. For one thing, if it causes a fire, you'll be responsible, particularly because you made it yourself and thus it wasn't UL (Und...

We have done this before. If you can get access to an overhead projector this works well. Get a picture of whatever you want, transfer it to a transparency for the projector, and project it on the ...

nylon /dacron /cotton, tweed or hemp is good also, but for weathering, a nylon/cotton is ok. double stitch, zig-zag or learn how Sails are sewn. A Sail Stitch is one of the strongest stitches known...