|
|
| *Home>>>Do It Yourself (DIY) |
My mixer shower that runs from the combi boiler is severely leaking. Any advise on how to fix it? |
My mixer shower was in use and then can't be turned off now. It is on for a good few hours but don't know how to stop it. Have stopped the mains water supply but need to get water back on in the rest of the taps. Is it very difficult to fix? Is it very difficult to install a new mixer shower? Much appreciate any tips and advise. this could be a couple of things really the seal inside the tap might be broken. second thing could be that thread on the actual tap could be broke. To be onst unless you know what your doing the best bet would be to get a local plumber round the normally wont charge anything just to have a look. |
| Related information |
Hate to say it, but this really isn't such a hot idea. For one thing, if it causes a fire, you'll be responsible, particularly because you made it yourself and thus it wasn't UL (Und... We have done this before. If you can get access to an overhead projector this works well. Get a picture of whatever you want, transfer it to a transparency for the projector, and project it on the ... nylon /dacron /cotton, tweed or hemp is good also, but for weathering, a nylon/cotton is ok. double stitch, zig-zag or learn how Sails are sewn. A Sail Stitch is one of the strongest stitches known... There really is no easy way. Too many selections and angles to chose from. I hate to tell you,,,but there rarely is a 90 degree angle in a house. If you can afford it buy about a total of 6 feet (2... It's really funny you should ask. My family laughs at me for saying that I would love to have my own tropical island away from the rest of the world where I would live off of coconuts. LOL. So... A lot depends on how deep the lights will go. I assume these are shallow lights. If you can't get to a crawl space, where will you run the wires? You can run wires and put a painted cover over... thermostatic shower controls only control the temp nothing else you will need to install a pump to increase the pressuer all mixer showers need a pump unless you have a pumped water system in your ... buy a sheet of ply wood at the hardware store. preferably 3/4 inch thick. You could then prop it on end tables or get another one and cut it in half, run a 3/4 inch groove half way down each of the... |
Categories--Copyright/IP Policy--Contact Webmaster |