What will happen if I just use bleach and water to clean the concrete before I stain it?

I already purchased the cleaning and etching solution but the chemicals are acid based and I would prefer not to use it.

You will probably end up wasting al the money you spent on the stain if you don't prep the concrete properly. Bleach will not do the same job as the acid, partially because it is a base (the opposite pH of an acid) and it is just not a strong enough cleaner anyway for this type of thing.
Without the right prep, the stain will not absorb correctly and will probably end up blotchy and, once it is ruined, you can't undo the staining.
Use the chemicals and wear all the protective gear recommended in the instructions. Follow the instructions and you will be fine.
Good Luck.

Most people would prefer not to use the cleaning and etching solutions, but they are necessary. That is why people use them. If they weren't necessary, people would stop buying them, and sooner or later the company would stop making them, right?

What will happen depends upon the kind of stain and the condition of the concrete. Some possibilities -- uneven or blotchy finish, discoloration of the finish over a period of time, peeling or failing finish, mineral stains through the finish, I'm certain I have left some out.

Use the products you purchased. Follow directions and be careful. People do it all the time.

Tags

　　Cooking & Recipes 　　Beer, Wine & Spirits 　　Other - Home & Garden 　　Maintenance & Repairs 　　Garden & Landscape 　　Do It Yourself (DIY) 　　Decorating & Remodeling 　　Cleaning & Laundry 　　Other - Family & Relationships 　　Weddings 　　Singles & Dating

Related information

What is an authoritative source on concrete work?

many ideas and ways to do all of this, i would google it on : how to install concrete measure: length x width = sq ft. divide sq. by 81 ( sq yd ) this will tell u how much concrete at 4&q...

How is the best way to touch up old furniture or used furniture with stain?

If you want to stain any piece of wood, you need to first sand the old finish off of the wood. Part of the old finish is a coating that makes it moisture resistant--it is this finish that is not al...

How do I make a 'laminated' name tag with average household items?

Use clear mailing/packing tape. print tag on your computer. Cut out and cover both sides with tape leaving enough margin for each side of tape to stick to the other. Trim edges and your done.

How would I hang something really heavy?

Use mollies or anchors to secure it to the wall where there are no studs. Also, purchase mounts that are rated for the weight of the shelf, there are several types to choose from, some of which ca...

Sewing Room I am decorating a sewing room and would like some advice and pointers?

tons of light both overhead as well as task lighting. Cupboards on one wall with a deep kind of ike kitchen cabinets. Than build glassed in shelves on top of that to the ceilling. Drop dow...

What's the best way to remove windows in my home?

The only way to avoid the glass getting every where if it has to be broken is to tape the glass completely with duct tape before breaking. If I am replacing a window I always do this to protect mys...

Any simple ways to keep your house cool?

I too have few windows that open, also a few that don't. Here's what we do at our home. During the cool parts of the day, being early morning and evening into night, we leave all our wi...

What paint do I use to paint the front of the dishwasher and the oven hood?

you dont want to paint these items with a brush... i dont care how straight and steady your hand is... you will see brush marks... it will not be pretty... a roller on these products will leave pit...