|
|
| *Home>>>Do It Yourself (DIY) |
How do I make a 'laminated' name tag with average household items? |
I need to make 2 or 3 nametags, but they need to be laminated. I have to find a way to cover them with something clear to keep things from getting on them. Thanks for your help=) Use clear mailing/packing tape. print tag on your computer. Cut out and cover both sides with tape leaving enough margin for each side of tape to stick to the other. Trim edges and your done. You could buy a labeler, they are usually about $20. I love mine! Wide roll of clear tape or small baggies for jewlery. Walmart sales clear shelf liner, we use this for crafts at VBS it works great. depending on how big your tags need to be you can use if you have it...clear boxing tape place your tag onto a piece then cover with another piece...trim with about a 1/8th inch border You can either use clear tape or clear contact/shelf paper that you can find at any grocery or home improvement store. Some dollar stores have it, too. Packing tape will work just as well, too. try using clear mailing tape. that works pretty well but it takes time to keep the layers from overlapping |
| Related information |
Use mollies or anchors to secure it to the wall where there are no studs. Also, purchase mounts that are rated for the weight of the shelf, there are several types to choose from, some of which ca... tons of light both overhead as well as task lighting. Cupboards on one wall with a deep kind of ike kitchen cabinets. Than build glassed in shelves on top of that to the ceilling. Drop dow... The only way to avoid the glass getting every where if it has to be broken is to tape the glass completely with duct tape before breaking. If I am replacing a window I always do this to protect mys... I too have few windows that open, also a few that don't. Here's what we do at our home. During the cool parts of the day, being early morning and evening into night, we leave all our wi... you dont want to paint these items with a brush... i dont care how straight and steady your hand is... you will see brush marks... it will not be pretty... a roller on these products will leave pit... If they really are in "series" as you say, if you unscrew the bulb in one, the other one will go out. I think you mean they are on the same circuit (but in parallel). Next, how is the tw... HAND quilting thread is always 100% cotton, usually mercerized (treated with caustic alkali under tension to increase strength, luster, and affinity for dye), and is often coated to avoid tangling.... A brick is the same size as the block 7-5/8 if you lay the brick as a sailer (on edge to hide holes) so it should line up perfectly ... |
Categories--Copyright/IP Policy--Contact Webmaster |