![]() |
|
| *Home>>>Do It Yourself (DIY) |
How do you prepare Aspen logs to make furniture? |
What do you use to sand the wood (hand sanding, orbital etc)? any specific brand or type of polyurathane or polyacrylic finish? Best initially would be strip the bark. Allow decet dry/cure time for the various pieces (In effect, monitoring any cracking; warping; twisting in the process) |
| Related information |
Joe, first you need to determine if you have a dry system or a wet system. Make sure you cut off the supply water before you start. Make sure you use a sealer or teflon tape on the head you are rep... 1.you need to clean your walls very well, no dirt no nails remove everything..then you need to scrap you walls to get rid of all of the chipping paint.. 2. you need to tap off your bathroom around... Use a drill bit for metal and slightly smaller than the head of the rivot. Drill straight and center of rivet head. When the rivet head breaks free the edges will spin around drill bit and a ring w... It depends on the type of carpet you are going to put down. If the carpeting you are looking to laydown is a berber or indoor/outdoor rated gluedown, you don't have to worry about padding or t... Sounds like the diverter is broken and needs to be replaced. (The lever that switches your tub water to shower)Call a plumber. The work should take less than an hour if you explain the problem befo... You don't have to. There is one readily available at pool supply stores (Leslie's should have it if there's one by you), or you can find them online. It is basically a version of ... go to a local paint/wall covering store...NOT LOWES OR HOME DEPOT.....and ask for help.....you can prime the walls with KILZ (oil based) and fill in the grooves in the paneling with drywall mud and... BOb has the first clue; feather the edges where the pulls are. SMILES yep I did groan. Semi gloss especially depending on what it was painted over has a tendancy to ROLL ... |
Categories--Copyright/IP Policy--Contact Webmaster |