What is the best way to get rid of the paper part of a sticker?

Be very careful about deciding to do this. It's a big job whether you use paint stripper or a sander or both, and it's possible that the paint has soaked into the wood which means you...

I just did that today. The center screw is for the pattern. Use the screw driver and turn to the right and left. If you want a 180 degree pattern figure the center of that turn by the screw dri...

Ideally fit it using a self adhsive underlay such as elastilon, it's great for laying hardwood floors over concrete ...

You are probably going to use a 4"X 4" post about 10' long. Considering rain is going to collect in your hole for your post, you really need holes to allow drainage and considering t...

I start using a masonary nail to give a centre for the drill bit. The spear shaped tile bits are the ones to use. The important thing is drill speed and it has to be slow. I use a low power cordl...

You can debate brand names for days and not get anywhere. There have been several brands mentioned repeatedly here, so take your pick. As far as features go: With a circular saw, it may be nice ...

PVC brickmolding is available at Lowes and HD, but I fear you`ll only have the same problem by adding it to the face of the windows. This also poses the problem of attachment. You may have very lit...

Depends if you actually use it or have you sorted out other way to heat the place? Ask your local authority for advice.