|
|
| *Home>>>Do It Yourself (DIY) |
I am replacing a bench cushion what density is recommended for the foam and is dacron wrap needed? |
this bench will be used in a family room. Any suggestions where to buy cushion at a good price? Most cities of any size, will have an Upholstery Supply business in the area. The medium density of the "pink" foam cores, will provide better sitting, than a "white or yellow" foam core. A dacron wrap, or batting, helps to fill the cushion cover, and to provide a "padding" that helps to fill corners of the cushion cover, and to bulk up the finished cushion. Like everything, even foam's price has increased. If you are able to shape the foam yourself (cut to pattern needed), than you might be able to purchase a foam piece cut slightly oversize, to enable you to cut it to pattern. An electric carving knife (used to carve roast turkeys), can be used to cut the foam to pattern. |
| Related information |
From your hardware store get plastic screw plugs to suit the screw you want to fit. get the corresponding masonery bit also get a smaller one to drill first. It is also easier yo drill a small hole... Couple of days. You'll need to let the tile set for a day before you grout. Two days for a small job. ...You can cut the nails with a reciprocating saw. No need to pull them out it will ruin the concrete and its too difficult. The linoleum will not be easy but you can rent a machine that scrapes t... With a tape measure ...use a product with oil, like orange oil, or wood oil. oil will remove sticky stuff. you can also use Goo Gone. soak it for a few minutes, then rub at it with a dry wash cloth. repeat as necessa... Some kind of engineer. Make sure you do well in your math classes. ...If you take the aerator off of your kitchen faucet and take it to a good hardware store, they may be able to sell you a hose adapter. Hose adapters exist, but aerators are not always standard. ... I have the same bar top and I used Zar clear coat or any coating made to put on hardwood floors. You will need to put about 15 coats to make sure that you get it waterproof. My bar has held up well... |
Categories--Copyright/IP Policy--Contact Webmaster |