|
|
| *Home>>>Do It Yourself (DIY) |
How do I hang blinds in my steel frame home? |
Do I need a special drill, special screws, or should I just hire a professional? The framing is red iron, but I'm not sure what gauge. Get a drill with a 1/4" hex bit and 1/4" hex self tapping screws. They will go right through the molding. Hire a professional if Troyboys' info scared you. |
| Related information |
i believe the question is measure the square footage, not livable or heat. if i were to build u a house and u gave me the plans the measurements would be from outside stud to outside stud. so... Try using a darker color of Bartley's Gel Stain. It is so easy to use. You just wipe it on with a cloth with the grain, then let it dry. Sanding between coats is generally not needed. In m... I would use Liquid Nails Clear. You can use it and spread it on the quarter round. Try off setting small dabs so that they can help to hold the quarter round in place. Make sure that you hold it... DIY Doc is right on target. I have been building decks for 25 years and you can carefully remove the deck boards and back the nails out. When you remove the nails it will make an unsightly gouge ... Not hard. Carefully remove the beading with a screwdriver and then remove the broken glass. Wear gloves. Remove the dry, old putty and ensure the surface is clean. Put a layer of putty into the ... paper is water soluble so you'd need a waterproof binding agent, which would take an age to dry or some form of epoxy resin which would outweigh the cash saving of using paper in the first pla... You fold it so it opens inside the wall ...It depends on what kind of area you are working with and what quality you want to go with. If you already have a capable drive way and room you can buy a cheap hoop for about $100. If you have to... |
Categories--Copyright/IP Policy--Contact Webmaster |