|
|
| *Home>>>Do It Yourself (DIY) |
What is the best way to install a wooden medallion ? |
I am trying to install a wood medallion on a wood floor. the medallion is in finished form and has a plywood base. i cannot remove any part of the medallion. it has to be installed in the wood floor (as is). is gluing it down the best option ? Glueing down is just about your only option unless you can come from under it and put a few screws from your floor joists into the plywood, be careful that your screws are of proper length so you don't damage your medallion. Good Luck |
| Related information |
B&Q do a spray called 'appliance spray',for cookers,fridges etc.Costs about a fiver a can and one can should do it.You might have to prime it first though. ...Precut circular wood tops are available that you could finish and attach. Try Lowes or Home Depot for that. A glass one might be interesting. You can buy round precut glass tops at Target that a... Use stick and peel glue available at Pearls Store or your nearest Stationary store.Is there any painted back ground on your canvass sheet?you can use a push pin to hang up your picture on a canvas... These might help ... I don't know much about hay, except to make it while the sun shines, but I know a little something about building. Use caution when cutting through the floor. Those joists double as collar ... Certainly these products are suitable for a second floor, but make sure your kitchen floor is properly supported. I suggest you first determine why it sags in the middle. It could be that you hav... After growing up on a Chicken farm this is an easy task, relatively speaking. Certainly you should add posts. Yes you should anchor the fencing by some method, to the ground. (Chickens do dig; and ... when cutting Formica always cut from the back side. use masking tape on front side in the center of scribed lines. cut Formica with a fine tooth finish blade on your skill saw , always cut slightly... |
Categories--Copyright/IP Policy--Contact Webmaster |