|
|
| *Home>>>Do It Yourself (DIY) |
How do I insulate my hollow metal frames that frame my vinly windows? |
I posted this before, but got replies thinking the window's frames were metal, they are vinly and 6 years old. The house was built in 1952. I HAVE THE FRAME IN THE HOUSE THAT THE WINDOW GOES IN. IS THIS WHAT THE WINDOW ITSELF IS IN? YOU HAVE THE FRAME IN THE HOUSE THAT THE WINDOW GOES IN OR THE FRAME THAT THE WINDOW ITSELF IS HOUSED. TRY THE BRAND DAP-TEX IT COMES IN A SPRAY CAN AND IT INSULATES THOSE SMALL HARD TO REACH PLACES I agree with Ario. |
| Related information |
You may find a home center store cheaper than a heat/AC supplier (key word MAY). On the other hand a supplier will have everything you need on hand. I would try letting my "fingers do the wa... Yes, 400-600 because of the slate and they have to make sure it is level. ...3M hooks work very well if you follow the directions. Make sure you get the right size hook for the job. I used 3M hooks in an apartment for 2 and a half years that did NOT come off until I took... The Q-model prefab garage system is exceptional for its lack of interior beams and poles, making it obstruction-free and perfect for storing cars, motorcycles, and even aircraft. It is offered in t... That depends on the type of furnace. If you look on the inside of the furnace, there should be a label that will tell you the clearance to combustibles. ...Baby wipes, as suggested, are a great way to clean fingerprints from many surfaces. BUT, use care with any soap product on the metallic strip. Any buildup could cause a mis-read in the store ma... If I am understanding the question you are asking ... try looking for a Jig, ( a device that is pre made with the correct angles and holes ) then you wont have to worry about messin up. ...Before you look for anything, check the fabric. Any polyester will not accept regular OTC dye ... |
Categories--Copyright/IP Policy--Contact Webmaster |