www.todaysmodernwoman.com
*Home>>>Do It Yourself (DIY)

How much would it cost to dissemble and reassemble a pool table?


We want to have a pool table moved to a different room in our home. I heard that we'd have to buy another felt top for the table. It's a pool table that originally was only $400 from Sears... and cost $300 to put together. I'm wondering would it cost about $300 or maybe $600 because it's being taken apart and put back together?

Even if it is not slate but the alternative stuff?

Yes, 400-600 because of the slate and they have to make sure it is level.

Call a couple of pool table retailers, and ask them.

Tags
  Cooking & Recipes   Beer, Wine & Spirits   Other - Home & Garden   Maintenance & Repairs   Garden & Landscape   Do It Yourself (DIY)   Decorating & Remodeling   Cleaning & Laundry   Other - Family & Relationships   Weddings   Singles & Dating
Related information
  • How can I attach a painting or frame to my bedroom wall without putting a nail on my wall?

    3M hooks work very well if you follow the directions. Make sure you get the right size hook for the job. I used 3M hooks in an apartment for 2 and a half years that did NOT come off until I took...

  • What's the advantage of building a prefabricated garage?

    The Q-model prefab garage system is exceptional for its lack of interior beams and poles, making it obstruction-free and perfect for storing cars, motorcycles, and even aircraft. It is offered in t...

  • How close to a furnace can you build a wall?

    That depends on the type of furnace. If you look on the inside of the furnace, there should be a label that will tell you the clearance to combustibles.

    ...
  • How can I clean the cards in my wallet?

    Baby wipes, as suggested, are a great way to clean fingerprints from many surfaces. BUT, use care with any soap product on the metallic strip. Any buildup could cause a mis-read in the store ma...

  • What is the proper way to drill?

    If I am understanding the question you are asking ... try looking for a Jig, ( a device that is pre made with the correct angles and holes ) then you wont have to worry about messin up.

    ...
  • How to dye a coat that is water resistant?

    Before you look for anything, check the fabric. Any polyester will not accept regular OTC dye

    ...
  • What is done with the toilet when a bathroom floor is retiled?

    Yes the toilet needs to be removed. As the first answer stated you should turn off the supply line and flush the toilet. Next, I always use a kerosene pump to remove any standing water in the s-ben...

  • What's a safe way to close the gap under a stove so mice won't go through it?

    The gap must have a purpose there, ventilation maybe? so buy a couple of mouse traps, and oh cheese is their favourite food. If you don't they will find another way and bring the family. Alte...

  •  

    Categories--Copyright/IP Policy--Contact Webmaster