|
|
| *Home>>>Do It Yourself (DIY) |
What is the proper procedure for removing grass? |
I would like to replace my lawn with rock landscaping, what do i need to do? You talking 100 sq ft or 10,000 sq ft? The 'right' way to remove 'smallish' portions of a lawn is with a sod cutter - you can rent them at a local rental house. Its just a blade on wheels and you push/kick it with your feet removing the grass and top inch or two of soil. Napalm. Cut it really short then aplly Round up at twice the concentration they recomend. That will kill everything to the roots. Spray round up, then lay plastic sheeting down and cover the top. if you are doing a small area use news paper, The slow way is with a shovel, the easy way is with a small excavator or skid steer... depends on how big the lawn is. Grass and weed killer Remove the top 4 inches or so of sod. Many local nurseries or reant-all places have the equipment to do this. |
| Related information |
First of all, keep it well away from your house foundations. Then construct a soakaway. To do this dig a deep hole, start off by putting rocks in the bottom , then smaller stones on top of that and... A dehumidifier would work much better. The musty smell will keep coming as fast as you suck it out. ...Plan your day or days around the weather forecast. Get tables for small items so you can group similar things together. You can also use boxes turned upside down for tables or spread cloths or tar... I have everything in Quicken. If you keep organized you can file as you go and not have massive piles of paper. I divide everything by type, each credit card separately, utilities all in one, ea... don't think so. the chemical doping process for the semi conductor uses some really nasty chemicals and some very expensive lab equipment. you are better off buying them. ...This one is kind of tough. For the decoration you could try a razor. Flat or lockblade. For these pins, your only real option is to use a Dremel tool with a tiny bit. Come to think of it, you could... you can use any molding and they come in carved or inlaid, plain or ready nto paint, white or even in wood in strips, 8' or 10' and up. You cut it to fit, apply it with clear silicone a... Is your slab level? if so, you are OK so far. going 4 to 6 feet out from a support base is not recommended (the majority of your deck would be supported, but not the outer rim. Embarassing when ... |
Categories--Copyright/IP Policy--Contact Webmaster |