|
|
| *Home>>>Do It Yourself (DIY) |
Can a tub surround be cut to fit an irregular space? |
My bathroom has a sloped ceiling over the tub. It had been tiled and the tiled collapsed. I would rather go with a surround that deal with re-tiling the area, but I am afraid that I will not be able to find a surround that fits because of the ceiling. Any ideas? All tub surrounds are cut to fit. just use a razor knife. also make sure you purchase one without soap holders in the corners. depending on how much of an angle you have to cut the soap holder might be in the way. last thing is make sure you use tub surround adhesive. regular adhesive will melt the tub surround as it dries. good luck and take your time its not hard at all. You can cut, but ask at store because all are different... many are designed to not be cut and would need trim to look OK after trimming |
| Related information |
fishing line behind the mirror and saw or floss behind it ...Sure you can just use a wire coat hanger and make the shape you want and cover the outside with a material or something but be sure nothing is touching the light bulb or you will have a fire. Ea... You need a certain amount of airflow through a loft space to carry moisture-laden air away, otherwise you get condensation build-up, which can lead to damp timbers etc. As long as the loft insulati... Not a lot you can do, you might be able to hide it a little if you try to fill the scratches with a coloured wax. Melt it in and scrape off the excess so it is flush. DON'T use metal to do thi... You could try to bring back the smoothness by rubbing it down with the paper as used by auto repairers, I think it is made by 3M, and has to be used with cold water. When you have successfully co... Go for carpet. Get a carpet rem, it will be cheap. You can get something you like later if you finish the area. Do not paint, It will be hard to put down tile or lino if the concrete is painted.... Try Greased Lightning. It works like a charm, and won't damage the wood. It's cheap, too. You can get it at Dollar General or Home Depot. It also works for alot of other stuff around ... If you buy a fixture with a built-in motion detector all you will need to do is to replace the old fixture with the new one. You can then leave your interior light switch on all the time and the o... |
Categories--Copyright/IP Policy--Contact Webmaster |