|
|
| *Home>>>Do It Yourself (DIY) |
Does anyone know how to make a gored skirt without a pattern? |
If I make the hips to fit her and double the hip size for the bottom will that be big enough or do I need to make it bigger than doubled? I am making 8 gores if that helps. http://www.tudorlinks.com/treasury/freep... If she has an old one that fits right. You can take it apart and use it for a pattern. My Mother did that for my shirts. If I had one that felt great. When it got worn, she would take it apart and make others that fit just right. What are "gores" ? |
| Related information |
Go to Home Depot and buy some pain remover and you won't need much sandpaper or electric just a little elbow grease. The paint remover will wrinkle up the old paint so that you can get it off... You could drill a hole in the bottle with a normal drill, simply by placing the bottle in a sink of water and drilling the bottle while it is submerged in the water. Cordless drills lessen the risk... I would suggest trying an experiment on one edge. Clean it with mineral spirits or use wax and grease remover from a paint store. If the edge is grimy or soiled or if you just fell compelled to san... Toss rags soaked with ammonia under your trailer. They hate the smell. ...scroll saw ...I'd go with peel a'n stick linoleum tiles. They allow you to go at your own pace. They are easy to cut and mold around the toilet if you start right. They can be dry fitted -in place- wel... First, you need to determine the maximum height that you need to reach. This height is a total of two figures: The height of the wall itself, and the difference in ground level height at the foun... Use a diamond plated core drill bit with diamond coolant .Run drill around 1400 - 1600RPM. Be sure the drill is running concentric and the machine's chuck has no wobble. Use a medium press... |
Categories--Copyright/IP Policy--Contact Webmaster |